Home About Us News Products Part and Service Contact Us
Products > Special Truck > Off-Road Dump Truck
D20 Off-Road Dump Truck
<< - PREVIOUS   NEXT
    Introduce:
    Introduce:

                                                        Dump Truck D20

    Model                                                                   D20
    N.V.W. 16000kg
    Payload 20000kg
    G.V.W.                                                                36000kg
    Overall dimensions (L*W*H)                               7365*2909*3145mm
    Wheelbase                                                            3600mm
    Track                      Front: 2383mm                         Rear: 2070mm
    Top speed                                                              38km/h
    Max. grade ability >29%
    Min. turning diameter                                                     <18m
    Engine                       Model                        Cummins NT855-C250
                                Max. Power                        187kw/2100r/min
                                Max. Torque                      1019Nm/1500r/min
    Clutch                                                 14'' Double-plate dry clutch
    Transmission                                                     Fuller 8JS 118C
    Gears
    1
    2
    3
    4
    5
    6
    7
    rev
    Ratio
    8.03
    5.32
    3.36
    2.54
    2.39
    1.58
    1
    8
    Drive axle             With wheel hubs reductions                 Total ratio: 13.78:1
    Steering                   Model: GX110C                 Working pressure: 14Mpa
    Brakes Double circuits, pneumatic control brakes system    working pressure: (750 50)Kpa
    Body hoist               Tipping time: <20sec.               Falling time: <20sec.
    Body capacity             Struck: 10.7m3                  Heaped (ASE2:1): 13.9m3
    Tyres                                                                 14.00-24
    Electrical system                                                     Voltage 24V

    Engine

    Model: Cummins NT855-C250
    Bore and stroke: 140*152mm
    Displacement: 14L
    Max. Power: 187kw/2100r/min
    Max. Torque: 1019N.m/1500r/min

    Clutch

    14'' Double-plate dry clutch

    Transmission

    7 forward and 1 reverse. Fuller manual transmission.

    Front axle

    Heavy-duty seamless steel tube welded
    Toe-in: (0-3)mm

    Drive axle

    Double reduction, full-floating axle shaft. Cast-steel axle housing.
    Central reduction ratio: 4.14:1
    Epicyclic reduction ratio: 3.33:1
    Total ratio: 13.78:1

    Steering

    Hydraulic assisted power steering 

    Brakes

    2 independent circuits, pneumatic control brake system internal expanding drum brake.
    Double pneumatic disengaged spring applied, parking brake.

    Suspension

    Semi-elliptic leaf springs with rubber bumper.
    Front suspension has individual absorbers.

    Body Hoist

    Twin three stage single acting cylinders mounted on the outer chassis frame.
    Max. Working pressure: 8.5Mpa        

    Frame

    Fabricated from high tensile steel. C-section channel with L-section reinforced members at the center.

    Cabin

    Ergonomically designed, all steel construction, left hand drive cabin with adjustable seat that is fully thermal and noise insulated. Instrumental panel with gauges, warning and indicator lamps. All controls and levers are located for ease of operation. Automotive safety glass all round for maximum operator protection.

    Dump body

    Rock-type, high-tensile steel plate-welded body with exhaust heating.
    Side plate and under floor ribs are manufactured from high yield point steel.

    Types

    Standard of tyres: 14.00-24
    Rim size: 10.00*24
    Pressure: (650 50) Kpa

    Electric system

    Single cable, negative ground, voltage rating 24V.