Home About Us News Products Part and Service Contact Us
Products > Truck Crane > Zoomlion truck crane
Zoomlion truck crane QY130H-1
    Introduce:

    The Zoomlion crane adopts polygon-section boom(Patent No.: ZL 2004 2 0035755.7)whichmakes the stress distributed more evenly, the load bearing condition improved, the deadweight reduced, and the load carrying capacity of boom improved.

    The boom adopts two-section independent telescoping mechanism (Patent No.: ZL 2004 2 0035753.8) which greatly improves the lifting performance of themiddle-long boom.


    The crane adopts double slewing mechanism and closed control circuit(Patent No.:ZL 2004 2 0035751.9)which make gear drive continuously and smoothly. In addition, it has the advantages of good cushioning performance, high accuracy of motions, high utilization ratio of energy and low heat of systemwhile the crane starts or brakes.


    The crane adopts load sensor and electro-hydraulic proportional control system (Patent No.: ZL 03 2 27135.2) which can improve the jogging performance of motions.


    The electric system has the faulty self-diagnosis function, which can monitor the working state of electronic control system in the course of running crane. If the abnormal phenomena happen, it can find out faults by a certain way to calculate, start the corresponding fault running modules and then display the corresponding information on interface. In this way, the service man can find out the faults and do maintenance at once.

    The crane adopts CAN-bus control technology which ensures the high reliability of data transfer.

    The crane adopts limit load control technology which can ensure the engine power to be full used and prevent it from shutdown due to overload.

    The crane is equipped with a load moment limiter with multifunction which can ensure high safety, reliability and accuracy.


    The crane adopts an operator's cab which can tilt 20'to broaden operator's view.


    The derricking mechanism adopts four modes, e.g. high speed, middle speed, low speed and jogging, to meet the requirements under different working conditions.


    The driver's cab adopts an advanced reversing rear display system which displays rear working area directly to make reversing much safer andeasier.

    Item

    Value

    Remarks

    Working performance specification

    Max. rated total lifting capacity kg

    130000

    Max. load moment of basic boom kN.m

    4980

    when the working radius is 6m

    Max. lifting height of basic boom m

    13

    Max. lifting height of main boom m

    49.5

    Deformation of boom is not taken into consideration.

    The value in the bracket indicates the crane with extension boom.

    Max. lifting height of fly jib m

    66(73)

    Working speed

    Max. speed of single rope on main winch m/min

    115

    The 4th layer of drum

    Max. speed of single rope onauxiliary winch m/min

    115

    The 4th layer of drum

    Derricking time of boom s

    90

    Telescopic time of boom s

    150

    Slewing speed r/min

    0~1.5

    Traveling specification

    Max. traveling speed km/h

    72

    Max. gradeability %

    40

    Min. turning circle diameter m

    24

    Min. ground clearance mm

    258

    Limits for exhaust pollutants and smoke

    Comply with related standards

    GB3847-2005

    GB17691-2005

    (Stage?)

    Oil consumption per hundred kilometers L

    80

    Mass specification

    Deadweight of crane in traveling condition kg

    70000(50195)

    The value in the bracket indicates advertised specification.

    Complete vehicle kerb mass kg

    69805(50000)

    The value in the bracket indicates advertised specification.

    Front axle load kg

    31000

    Including boom

    Intermediate and rear axles loadkg

    39000

    Including boom

    Dimension specification

    Overall dimensions(L*W*H)mm

    14300*3100*3750

    Advertised specification (excluding boom)

    16165*3100*3818

    Including boom

    Base on outriggers m

    7.04

    Distance between outriggers m

    8.5 (full extended)

    5.6 (half extended)

    Main boom length m

    13~48

    Main boom angle'

    -2~80

    Fly jib length m

    10,17

    Extension boom + fly jibm

    7.5, 24

    Extension boom is available as options.

    Offset angle of fly jib '

    0, 15, 30

    Chassis

    Model

    ZLJ5700

    Feature No.:ZLJ5700H3

    Class

    II

    Engine

    Model

    OM502LA

    Rated power KW/r/min

    390/1800

    Max. output torque N.m/r/min

    2400/1080

    Manufacturer

     

    Superstructure engine

    Model

    TAD721VE

    Euro II Emission

    Rated power KW/r/min

    195/2300

    Max. output torque N.m/r/min

    905/1400~1800