Home About Us News Products Part and Service Contact Us
Products > Wheel Loader > LIUGONG WHEEL LOADER
Liugong CLG842III Tool Carrier Wheel Loader


    Semi-automatic power shift gearbox and KD function for faster response time.
    High drive speeds with 4 forward and 3 reverse gears with a maximal speed can reach 38 km/h.
    Responsive and accurate hand control with a single joy stick with integrated KD function.
    Double brake pedals simplify simultaneous driving and mechanical operations
    Fast cycle times.
    Automatic load leveling system prevents spillage during lifting.
    Reversable fan motor cooling system operator can remove the dust on the surface of the evaporator conveniently by using the reversing function of the fan.


    Vehicle has a strong flexible frame that will withstand load and torsion stresses in all manner of operating conditions.
    8 bar linkage operating device.
    Key components frOm world class suppliers.
    Warranty and service programs available.


    Fuel efficient electronic engine.
    Torque converter is matched to the engine to ensure maximum power transfer.
    Hydraulics employ a dual_pump system and converging and self-unloading function to reduce energy loss.
    Air pre_cleaner filter system improves overall engine efficiency in dusty conditions and lengths service life of main air filter system.


    Differential Limited Slip on Front and Rear Axles
    Oscillation Angle, Each Side 13'

    Basic Data
    Bucket Capacity 3.0yd³
    Operating Weight 34923lb
    Breakout Force (max) 26977lb-ft
    Static Tipping Load (straight) 24901lb
    Static Tipping Load (full turn) 21378lb

    Brake System
    Service Brakes Full Hydraulic Wet Multiple Disk Brakes (all 4 wheels)
    Parking Brake Auto and Manual Electronically Controlled
    Emergency Brake Auto and Manual System

    Fuel Tank 63gal
    Hydraulic Tank 63gal
    Crankcase 5.8gal
    Transmission 11.9gal
    Differential and Final Drives (front) 9.2gal
    Differential and Final Drives (rear) 9gal

    Torque Converter Single Stage, Three Element
    Transmission Automatic ZF 4F/3R

    Electrical System
    System Voltage 24V
    Starter Motor 24V

    Model Cummins QSB6.7L
    Type 6 Cylinder, Turbocharged
    Rated Power 193hp
    Rated Net Power 181hp
    Peak Net Power 186hp
    Peak Torque 687lb-ft @1400rpm
    Displacement 409in³
    Tier Rating Euro Stage IIIA & EPA Tier 3in³

    Hydraulic System
    Main Pump Vane Pump
    Pump Flow 72gal/min
    Relief Pressure 2900psi
    Pilot System Relief Pressure 560psi
    Hydraulic Cycle Time (total) 12.4s

    Parameters for Entire Loader
    Bucket Capacity 3.0yd³
    Rated Load -lb
    Rated Power 193hp
    Operating Weight 34923lb

    Steering System
    Type Articulated Frame, Full Hydraulic
    Number of Steering Cylinders 2
    Steering Pump Vane Pump
    Relief Pressure 2500psi
    Steering Angle (each side) 40'